What are the 4 parts of a DC motor?
These components are: a stator, a rotor, a yoke, poles, armature windings, field windings, commutator, and brushes. Many of its parts are the same as parts of AC motor, but with a little change.
What are the main parts of the DC motor?
DC motors include two key components: a stator and an armature. The stator is the stationary part of a motor, while the armature rotates. In a DC motor, the stator provides a rotating magnetic field that drives the armature to rotate.
What are the 6 parts of a DC electric motor?
These six components include:
- 1) The Rotor. The rotor is the moving part of your electric motor. …
- 3) The Bearings. The rotor in your electric motor is supported by bearings, which allow it to turn on its axis. …
- 4) The Windings. …
- 5) The Air Gap. …
- 6) The Commutator. …
- What Do All of These Components Have in Common?
What is the parts of a motor?
A simple motor has the following parts:
- A power supply – mostly DC for a simple motor.
- Field Magnet – could be a permanent magnet or an electromagnet.
- An Armature or rotor.
What are the five basic parts of a motor?
Here’s a look at five main parts of an electric motor.
- Rotor. This is the electric motor’s main moving part. …
- Stator. The stator plays a crucial role in creating the magnetic field needed to drive the rotating armature. …
- Air Gap. …
- Windings. …
What is DC machine and its parts?
Each DC machine contains two separate terminals with a magnetized center between them. There are two main parts, the stator and the rotor. The stator contains parts such as brushes, magnets and housing for the whole motor. The rotor contains the windings, the communicator and the output shaft.
What are the 3 types of DC motors?
Main Types of DC Motors
- Permanent Magnet DC Motors. The permanent magnet motor uses a permanent magnet to create field flux. …
- Series DC Motors. In a series DC motor, the field is wound with a few turns of a large wire carrying the full armature current. …
- Shunt DC Motors. …
- Compound DC Motors.
What is armature and field winding?
Armature Winding is the winding, in which voltage is induced. Field Winding is the winding in which the main field flux is produced when the current through the winding is passed.
Is armature and rotor same?
So basically, the rotor consists of a field magnet which rotates while the rotor remains stationary and on the other hand the armature carries current and is stationary and part of the stator.
What are the parts of a DC generator?
The key parts of DC generators are yoke, poles, pole shoes, armature core, armature winding, commutator, brushes, magnetic field system, commutator, end housings, bearings, and Shafts. These are the parts of DC generators and will be discussed below in more detail.
What are the parts of electric motor Class 10?
Construction of Electric Motor
- (1) Armature coil. It consist of a single loop of an insulated copper wire in the form of a rectangle.
- (2) Strong field magnet. Armature coil is placed between 2 pole pieces of a strong magnet which provide strong magnetic field.
- (3) Split ring type commutator. …
- (4) Brushes. …
- (5) Battery.
What is the rotor in a DC motor?
The rotor contains coil windings that are powered by the DC current and the stator contains either permanent magnets or electromagnetic windings. When the motor is powered by DC current, a magnetic field is created within the stator, attracting and repelling the magnets on the rotor.
How many parts does a motor have?
In broad terms, the engine can be segregated into three key parts, the head, the block and the oil sump. 1. The cylinder head is the channel through which the fuel enters the engine chamber and exhaust gases exit. Its key components are the camshafts, valves and spark plug.
What are the two parts of a motor?
An electric motor consists of two major parts, the rotor and stator (see Figure 5).
What is DC motor Class 10?
D.C. motor can be defined as a machine which converts electrical energy to mechanical energy of rotation based on the principle of magnetic effect of current. The DC motor works according to Fleming’s right hand rule.